Restart Inhibit is initiated by the myKubota user changing the state of the machine in the Restart Inhibit section of myKubota. The signal is sent from the user’s mobile device to the KubotaNOW system. Then the KubotaNOW Telematics device next checks in, it receives the command to enable or disable the starting of the machine. Commands sent to the KubotaNOW telematics device will only be received at a scheduled update time by the device.

(*) Restart Inhibit is not available on all KubotaNOW-supported models

Restart Inhibit: Disable Starting

To disable starting with Restart Inhibit:
Launch the myKubota app
Select the desired machine in the Equipment tab
Click “KubotaNOW Inhibit Restart”
Display will say “Your equipment will start normally”
Click “Disable Starting”
Click “Continue” to confirm selection
Display will read “Sending command to Disable Starter…”. This screen will remain until command has been received by KubotaNOW Telematics device.
Turn the key to ignition ON for 3-5 seconds. Wait for myKubota app to refresh.
Display should now read “Your Starter is Disabled”

Restart Inhibit: Enable Starting
To enable starting with Restart Inhibit:

Launch the myKubota app
Select the desired machine in the Equipment tab
Click “KubotaNOW Inhibit Restart”
Display will say “Your Starter is Disabled”
Click “Enable Starting”
Click “Continue” to confirm selection
Display will read “Sending command to Enable Starter…”. This screen will remain until command has been received by KubotaNOW Telematics device.
Turn the key to ignition ON for 3-5 seconds. Wait for myKubota app to refresh.
Display should now read “Your equipment will start normally”

Best Practices:

If the machine is running and the user desires to inhibit restart, simply enable it in the myKubota app. While the machine is running, the command will be received. When the machine is shut off, restart inhibit will be enabled and the machine will not start.
If the machine is off and the user wants to enable restart inhibit (disable starting), simply enable it in the myKubota app. Turn the machine key to ignition ON for 3-5 seconds, then back off. Restart inhibit should now be enabled and the machine will not start on the next attempt.
To disable restart inhibit, select the “Enable Starting” command in myKubota. Turn the machine key to ignition ON for 3-5 seconds, then back off. Restart Inhibit should now be disabled and the machine will start normally on the next attempt.

Restart Inhibit

KubotaNOW Telematics Features & Support

Related

myKubota Support

Service